China high quality auto parts colored rubber o ring seals
Product Name:
China high quality auto parts colored rubber o ring sealsModel No.:
SW-14031101Price:
USD0.01-0.02Minimum Order:
1000
Product Abstract:
colored rubber o ring seals 1.high quality and best price 2. Model:more than 4000 3.SO03601,AS568,JISB2401 4.ISO2000;TS1694
- Product Description
1.Rubber Material
Viton O ring.
Abbreviation :FKM
Common Name :Fluoro Elastomers
ASTM D-2000 classification:HK
Military(Mil-Std417) :MIL=R-25897/MIL-R-83248
Chemical Definition :Fluorinated Hydrocarbon
Durometer-Range (Shore A) :60-90
Tensile Range (P.S.I) :500-2000
Elongation (Max.%) :300
Compression Set:Good
Resilience-Rebound:Fair
Abrasion Resistance:Good
Tear Resistance:Good
Solvent Resistance:Excellent
Oil Resistance:Excellent
Low Temperature Usage (°F:+10° to -10°
High Temperature Usage (°F) :400° to 600° (depending on time and service condition)
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Good
Advantage:
1. Heat resistance up to 600°F
2. Resistance to wide range of oils and solvents; specially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils.
Disadvantage:
1. Not recommended for ketones, low molecular weight esters and nitro containing compounds.
Usage:
Automobile,motorcycle,diesel engine,and fuel system
Silicone O ring.
Abbreviation :silicone
ASTM D-2000 classification:FC,FE,CE
Military(Mil-Std417) :TA
Chemical Definition :polysiloxane
Durometer-Range (Shore A) :30-90
Tensile Range (P.S.I) :200-1500
Elongation (Max.%) :700
Compression Set:Good
Resilience- Rebound:Good
Abrasion Resistance:Fair to poor
Tear Resistance:poor
Solvent Resistance:poor
Oil Resistance:Fair to poor
Low Temperature Usage (°F:-60° to -150°
High Temperature Usage (°F) :450°
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Good
Advantage:
1.after modulating formula, the tensile strength up to 1500 psi, and tear resistance up to 88 LBS.
2.Good elasticity and good compression deformation.
3.good resistance to neutral solvent.
4.excellent heat resistance.
5.With excellent cold resistance.
6.with excellent resistance to erosion of ozone and oxides .
Disadvantage:
1.Does not recommend is suitable for most concentrated solvent, oil, concentrated acid after dilute sodium hydroxide
Usage:
Appliance:electric kettle,electric iron,Microwave owen,etc
Keypad,heat shock in DVD,cable connector
NBR O ring.
Abbreviation: NBR
Common Name:Buna N, Nitrile, NBR
Chemical Definition:Butadiene Acrylonitrile
General Characteristics:Waterproof,oilproof
Durometer-Range (Shore A):20-95
Tensile Range (P.S.I):200-3000
Elongation (Max.%):600
Compression Set:Good
Resilience-Rebound:Good
Abrasion Resistance:Excellent
Tear Resistance:Good
Solvent Resistance:Good to Excellent
Oil Resistance:Good to Excellent
Low Temperature Usage (°F):-30° to - 40°
High Temperature Usage (°F):to 250°
Aging Weather-Sunlight:Poor
Adhesion To Metals:Good to Excellent
Usual Hardness range:50-90 shore A
Advantage:
1. Has good solvent, oil, water and hydraulic fluid resistance.
2. Good compression set, abrasion resistance and tensile strength.
Disadvantage:
1. Not recommended for using in highly polar solvents such as acetone, and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons.
Usage: fuel tank, grease-box, hydraulic, gasoline, water, silicone oil, etc
HNBR O ring.
Abbreviation:HNBR
Common Name:HNBR
Chemical Definition:Hydrogenated AcrylonitrileButadiene
General Characteristics:abrasion, compression set, tensiles
Durometer-Range (Shore A) :50-90
Tensile Range (P.S.I) :2600
Elongation (Max.%):530
Compression Set:Excellent
Resilience- Rebound:Excellent
Abrasion Resistance:Excellent
Tear Resistance:Excellent
Solvent Resistance:Good
Oil Resistance:Excellent
Low Temperature Usage (°F) :-65° to 250°
High Temperature Usage (°F) :to 350°
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Good
Usual Hardness range:60-80 shore A
Usage: Fridge,automobile engine,etc
EPDM O ring.
Abbreviation:EPDM
Common Name:EPR, EPT, EPDM
ASTM D-2000 classification:CA
Military(Mil-Std417) :RS
Chemical Definition:Ethylene Propylene
Durometer-Range (Shore A) :30-90
Tensile Range (P.S.I) :500-2500
Elongation (Max.%) :600
Compression Set :Good
Resilience-Rebound :Good
Abrasion Resistance:Good
Tear Resistance:Fair
Solvent Resistance:Poor
Oil Resistance:Poor
Low Temperature Usage (°F) :-20° to 60°
High Temperature Usage (°F):to 350°
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Fair to Good
Usual Hardness range:50-90 shore A
Usage: Sanitary ware; brake; radiator
NR O ring.
Abbreviation:NR
Common name:Nature Rubber
ASTM D-2000 classification:AA
Military(Mil-Std417) :RN
Chemical Definition :polyisoprene
Durometer-Range (Shore A) :20-90
Tensile Range (P.S.I) :500-3500
Elongation (Max.%) :700
Compression Set:Excellent
Resilience- Rebound:Excellent
Abrasion Resistance:Excellent
Tear Resistance:Excellent
Solvent Resistance:Poor
Oil Resistance:Poor
Low Temperature Usage (°F:-20° to -60°
High Temperature Usage (°F) :to 175°
Aging Weather-Sunlight:Poor
Adhesion To Metals: Excellent
Usual Hardness range:35-80 shore A
Neoprene O ring.
Abbreviation :Neoprene
ASTM D-2000 classification:BC,BE
Military(Mil-Std417):SC
Chemical Definition :polychloroprene
Durometer-Range (Shore A) :20-95
Tensile Range (P.S.I) :500-3000
Elongation (Max.%) :600
Compression Set:Good
Resilience- Rebound:Excellent
Abrasion Resistance:Excellent
Tear Resistance:Good
Solvent Resistance:Fair
Oil Resistance:Fair
Low Temperature Usage (°F:+10° to -50°
High Temperature Usage (°F) :to 225°
Aging Weather- Sunlight:Good
Adhesion To Metals:Good to Excellent
Usal Hardness range:50-90 shore A
2.Company Information
Xinhuaxu Rubber Products Co.,ltd, engages in the R&D, production and sales of premium o-ring,sealing gaskets and custom rubber seals.The main raw materials,such as NBR,FRM,SI and EPDM, are all imported from premium suppliers inTaipei,Japan,German,etc. Our products are widely used in automotive,electronics,aerospace,shipbuilding,mechaninal and sanitary industries and spread all over the world.
Factory
Company Equipment
Company certificate
Company Team
3.About Us
Compared with othersuppliers,what advantage do we have?
1.our products meet following standard:ISO3601,AS568,DIN3771,JISB2401,etc.
2.Long-term stock for the ready-made mold o-ring.
3.Freely mould can be provided when the quantity reaches a certain standard.
4.Polishing process to ensure no brake marks.
5.Griding process can be provided.Smooth surface with a not obvious joint line.
Packaging & Shipping4.Packaging & Shipping
5.FAQ
1.What is your MOQ?
Our MOQ is 1000-2000 pcs
2.What is your lead time?
If there is in stock,the lead time will be 3-5 working days,if out of stock,it will be 7-10 working.
3.What is your payment?
We accept paypal,T/T,Western union,bank transfer.
4.What is your shipping way?
By Air:Fedex,DHL,T/T,EMS,UPS.. or by sea.
5. How do you guarantee the o ring is correct size ,material and hardness when I receive the goods?
Before shipping, we will send you our specification report.
6.For OEM or ODM order, how do I guarantee the product correctly meet my requirement?
Before we start to production, we will open a new sample mould to make a samples, after you confirm it, we will be ready to produce
- Related Products
- [Return Home] [Print] [Go Back]
Contact Us
Tel:
18028761392Fax:
0086 755-84518329E-mail:sales@singwax.com
E-mail:sales@singwax.com
E-mail:sales@singwax.com
