The mechanical properties of rubber seals

Home > News > The mechanical properties of rubber seals

News

2016-08-26 17:45:49: 　
TheThe mechanical properties of rubber seals

Rubber seals mechanical performance than the usual high-density polyethylene. It has outstanding impact resistance, stress cracking resistance, high temperature creep resistance, low coefficient of friction, self-lubricating properties, excellent chemical resistance, fatigue resistance, noise damping resistance, radiation resistance and the like.

Rubber seals temperature 100 ~ 110 ?. Cold is good, it can be used at -269 ?. Density 0.985g / cm3, molecular weight 2 million products, its tensile strength 40MPa, elongation at break of 350%, flexural modulus of 600MPa, Izod notched impact red constantly. The amount of wear (MPC method) 20mm.

NBR rubber seals (NBR), fluoro rubber (VITON \ FKM), silica gel (SIL), ethylene propylene diene rubber (EPDM).

NBR rubber ring color is generally black, conventional hardness of 70 degrees.

Rubber seals fluorine rubber color generally brown-based, conventional hardness of 75 degrees.

Silicone rubber seals mainly transparent color is generally white, conventional hardness of 70 degrees.

UHMWPE has excellent abrasion resistance, good low temperature impact resistance, self-lubricating, non-toxic, water resistance, chemical resistance, heat resistance than the general PE. mechanical properties of rubber seals

Rubber seals mechanical performance than the usual high-density polyethylene. It has outstanding impact resistance, stress cracking resistance, high temperature creep resistance, low coefficient of friction, self-lubricating properties, excellent chemical resistance, fatigue resistance, noise damping resistance, radiation resistance and the like.

Rubber seals temperature 100 ~ 110 ?. Cold is good, it can be used at -269 ?. Density 0.985g / cm3, molecular weight 2 million products, its tensile strength 40MPa, elongation at break of 350%, flexural modulus of 600MPa, Izod notched impact red constantly. The amount of wear (MPC method) 20mm.

NBR rubber seals (NBR), fluoro rubber (VITON \ FKM), silica gel (SIL), ethylene propylene diene rubber (EPDM).

NBR rubber ring color is generally black, conventional hardness of 70 degrees.

Rubber seals fluorine rubber color generally brown-based, conventional hardness of 75 degrees.

Silicone rubber seals mainly transparent color is generally white, conventional hardness of 70 degrees.

UHMWPE has excellent abrasion resistance, good low temperature impact resistance, self-lubricating, non-toxic, water resistance, chemical resistance, heat resistance than the general PE.
Previous [Return Home] [Print] [Go Back] Next

Related Information