The main methods to prevent oil pollution

Home > News > The main methods to prevent oil pollution

News

2016-10-12 17:33:44: 　
The main methods to prevent oil pollution:

Xinhuaxu seals on the hydraulic components, whether it is maintenance or replacement of new parts, in addition to the pipeline must be cleaned before installation, the castings have to undergo a thorough cleaning, including sandblasting and other mechanical role in the use of cleaning and chemical cleaning. Such as cleaning in trichlorethylene, and then drying with compressed air.

Xin Huaxu seal hydraulic system in the completion of the assembly should be carried out when the empty cycle flushing, when the other components of the system as far as possible to prevent the pipeline to clean up the dirt contaminated.

Xin Huaxu seals the use of hydraulic components before kerosene wash, prohibit the use of fibers with fabric (such as cotton) wipe.

Tank to be a reasonable seal, through the atmosphere to set up air filter. The seal must be reliable, prohibit the use of oil-resistant seals and hoses.

Reasonable use of the type of oil filter, oil efficiency should be from the ability to block dirt, to allow work pressure, eliminating the pollution is convenient and other considerations.

Regular replacement of the oil, the summer hydraulic system should be No. 32, No. 46 oil, 68 oil in winter, add new hydraulic oil to be pre-filter, to be purified. Filtration can only be insoluble suspended impurities, and soluble impurities can not be filtered, can only be used to limit the content of regular oil change.

In addition, even if the oil seal filter is very good, in the long-term pressure and temperature will be repeated under the effect of deterioration, loss of performance, also need to be replaced regularly.

The main methods to prevent oil pollution:

Xinhuaxu seals on the hydraulic components, whether it is maintenance or replacement of new parts, in addition to the pipeline must be cleaned before installation, the castings have to undergo a thorough cleaning, including sandblasting and other mechanical role in the use of cleaning and chemical cleaning. Such as cleaning in trichlorethylene, and then drying with compressed air.

Xin Huaxu seal hydraulic system in the completion of the assembly should be carried out when the empty cycle flushing, when the other components of the system as far as possible to prevent the pipeline to clean up the dirt contaminated.

Xin Huaxu seals the use of hydraulic components before kerosene wash, prohibit the use of fibers with fabric (such as cotton) wipe.

Tank to be a reasonable seal, through the atmosphere to set up air filter. The seal must be reliable, prohibit the use of oil-resistant seals and hoses.

Reasonable use of the type of oil filter, oil efficiency should be from the ability to block dirt, to allow work pressure, eliminating the pollution is convenient and other considerations.

Regular replacement of the oil, the summer hydraulic system should be No. 32, No. 46 oil, 68 oil in winter, add new hydraulic oil to be pre-filter, to be purified. Filtration can only be insoluble suspended impurities, and soluble impurities can not be filtered, can only be used to limit the content of regular oil change.

In addition, even if the oil seal filter is very good, in the long-term pressure and temperature will be repeated under the effect of deterioration, loss of performance, also need to be replaced regularly.
Previous [Return Home] [Print] [Go Back] Next

Related Information