Closely relatedClosely related to the raw material and product quality rubber seals

 

Raw material quality rubber seals are closely related to the reliability of the final product. Common problems are: inconsistent quality of raw materials, when raw rubber mixing vote wrong, improper storage of raw materials or mix (cross-contamination), rubber mixing uneven curing conditions (temperature, time, pressure, etc.) is wrong, seal products improperly stored, improper use of molds. These issues are often related to the production process quality control. When choosing the ordering side seal manufacturers, should after several visits, research and product testing. In the delivery process, the seals may also require the company to provide true, accurate inspection reports.

 

Sealing materials commonly used EPDM rubber (EPDM), nitrile rubber (NBR), silicone rubber (VMQ), fluororubber (FKM or FPM) and chloroprene rubber (CR) and the like.

 

These rubber characteristics vary, different applications. Select the material from the various considerations, such as temperature, whether the material withstand medium hardness of the material, compression permanent deformation and wear a variety of factors and so on.

 

A good rubber seals, if used improperly, can cause failure of the entire product, not necessarily the best rubber seals must be the most appropriate.

Shenzhen Xu Xinhua Rubber Products Co., Ltd.

Phone: 0755-84641113 / 0755-4008385060

Enterprise QQ: 2355717453

E-mail: 2355717453@qq.com

     518118

Fax: 0755-84518329

http://www.xhx168.com/

http://www.o-ringswx.cn/

Shenzhen XinhuaXu Rubber Products Co., Ltd

Greeting Tin Sum Shenzhen Jintian Road community after No. 350 to the raw material and product quality rubber seals

 

Raw material quality rubber seals are closely related to the reliability of the final product. Common problems are: inconsistent quality of raw materials, when raw rubber mixing vote wrong, improper storage of raw materials or mix (cross-contamination), rubber mixing uneven curing conditions (temperature, time, pressure, etc.) is wrong, seal products improperly stored, improper use of molds. These issues are often related to the production process quality control. When choosing the ordering side seal manufacturers, should after several visits, research and product testing. In the delivery process, the seals may also require the company to provide true, accurate inspection reports.

 

Sealing materials commonly used EPDM rubber (EPDM), nitrile rubber (NBR), silicone rubber (VMQ), fluororubber (FKM or FPM) and chloroprene rubber (CR) and the like.

 

These rubber characteristics vary, different applications. Select the material from the various considerations, such as temperature, whether the material withstand medium hardness of the material, compression permanent deformation and wear a variety of factors and so on.

 

A good rubber seals, if used improperly, can cause failure of the entire product, not necessarily the best rubber seals must be the most appropriate.

Shenzhen Xu Xinhua Rubber Products Co., Ltd.

Phone: 0755-84641113 / 0755-4008385060

Enterprise QQ: 2355717453

E-mail: 2355717453@qq.com

     518118

Fax: 0755-84518329

http://www.xhx168.com/

http://www.o-ringswx.cn/

Shenzhen XinhuaXu Rubber Products Co., Ltd

Greeting Tin Sum Shenzhen Jintian Road community after No. 350